NEW D-LINK DES-1008FR PRO Switch 8 Port 7X 10/100 + 1X BASE-FX SC 20KM FIBER
**NEW ORIGINAL RETAIL BOX BRAND**
Power EU Plug, Comes with AC Plug Adapter for your country
Automatic detection of MDI / MDIX function and Plug-and-Play
7 10/100BASE-TX ports support auto- polarity of MDI / MDIX. This eliminates the need for cross over cables or ports uplink. Any port can be connected to a server, a hub or a switch , using the usual straight-through twisted-pair cable . The switches also support flow control and half / full duplex modes for each port.
DES-1008FR/PRO switch can be used to work in tandem with media converter DMC-920T.
Optical port 100BASE-FX
Switches are equipped with optical port capable of transmitting data over long distances. This port can be used to connect to the server via a secure fiber- optic cable or to connect the Switch to the backbone network.
Fast and reliable data transfer
With support for 802.3x flow control and method of switching fast store-and-forward, switches provide secure data transmission with low latency to prevent the transmission of erroneous packets between segments.
Improved protection of ports
A new series by improved hardware performance all switch ports provide increased resistance to interference and static voltage or SCS with unstable voltage supply, which allows you to set a series of switches / PRO -level access to the provider networks ETTH and remote segments of your network.
вЂў IEEE 802.3 10BASE-T Ethernet
вЂў IEEE 802.3u 100BASE-TX/100BASE-FX Fast Ethernet
вЂў ANSI / IEEE 802.3 NWay auto-negotiation
вЂў IEEE 802.3x Flow Control
вЂў CSMA / CD
вЂў 10 Mbit / s (half duplex)
вЂў 20 Mbit / s (full duplex)
вЂў 100 Mbit / s (half duplex)
вЂў 200 Mbit / s (full duplex)
вЂў UTP category 3, 4, 5 (100 m)
вЂў EIA/TIA-568 150 ohm STP (100 m)
вЂў UTP Category 5 (100 m)
вЂў EIA/TIA-568B 150 ohm STP (100 m)
вЂў Bi-directional single-mode fiber 9/125 micron (SC, 20 km), (TX: 1310nm / RX: 1550nm)
* The switch can be paired with a media converter DMC-920T.
вЂў Full / Half Full / half duplex for 10/100 Mbit / s
Data exchange interface
вЂў Auto-detect MDI / MDI-X on all ports for twisted pair
вЂў At the port: 10/100 Mbit / s, Full-duplex/Collision
вЂў On the device: Power
вЂў 1.6 Gbit / s
вЂў 1K entries per device
Amount of buffer memory
вЂў 64 KB per unit
Speed ??Packet Filtering / Forwarding (half duplex)
вЂў Ethernet: 14,880 pps per port
вЂў Fast Ethernet: 148,800 pps per port
вЂў Through external AC power adapter
вЂў 7.5V, 1A DC
вЂў 4,887 W
вЂў From 0 ? to 50 ? C
вЂў From -10 ? to 70 ? C
вЂў From 10% to 90% non-condensing
вЂў From 5% to 90% non-condensing
вЂў 192 x 118,5 x 32 mm (device only)
вЂў 314 g
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: