D-LINK ANT24-ODU1M WiFi Antenna 1M Low loss Cable RP N to N-type Plug Connectors
Product Code: 252753441207
Availability: In Stock
NEW D-LINK ANT24-ODU1M WiFi Antenna 1M Low loss Cable RP N to N-type Plug Connectors
Replacing the standard antenna antenna high gain c
Wireless devices such as access points and wireless routers are equipped with external antennas to transmit and receive signals. These antennas have a certain gain, providing a working area defined by their manufacturer . Many manufacturers equip their wireless devices with removable external antennas , allowing you to replace them with more powerful antennas that if you want to increase the range of your wireless network.
To replace the antenna wireless device more powerful antenna , you can (1 ) replace the old new antenna by screwing it directly to the device or (2) place the new antenna with an extension cable is at a great distance from the wireless device in an open space to improve signal transmission and reception .
Sets antenna cables D-Link include extension cables are required to install the antenna away from your wireless devices . To meet the different needs involved in installing cables are available in various lengths . Aerial cables are made of solid materials , providing protection from the load during operation and harsh environments , including heat, rain and intense sun exposure .
For indoor installation , in which the wireless devices should be located near the rest of the equipment in a wiring closet or computer room , the antenna cables D-Link can also be used to place the antenna in the open space of a few meters away from the wireless device to improve signal transmission and reception .
Operating frequency range
вЂў 2.4 to 2.5 GHz
вЂў 50 ohms
Insertion loss at frequencies from 2.4 to 2.5 GHz
вЂў From 0.5 to 0.6 dB
Insertion loss at frequencies from 5.15 to 5.75 GHz
вЂў 1 to 1.15 dB
Voltage standing wave ratio (VSWR)
вЂў 1.3:1 in the frequency range from 2.4 to 2.5 GHz
вЂў Black polyethylene
вЂў 1 m
Losses in the cable
вЂў 0.6 dB
вЂў RP-N and N-type
Minimum bend radius
вЂў 25.4 mm
вЂў Outdoors and indoors
Operating temperature range
вЂў From -40 ? C to +85 ? C
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: